Tall bike
A tall bike is an unusually tall bicycle often constructed by hobbyists from spare parts. Typically, two conventional bicycle frames are connected by welding, brazing, or other means, one atop the other.[1][2] The drive train is reconfigured to connect to the upper set of pedals, and the controls are moved to the upper handlebar area.
Alternatively, a bicycle can be built by inverting the frame, inserting the fork from the 'wrong side', flipping the rear wheel, adding a long gooseneck and tall handlebars, then welding an extended seat post tube to the 'bottom' (now the top) of the frame. This type of tall bike is made with only one bike frame and is often called an upside-down bike rather than a tall bike, though the seat can be pretty high, depending on the frame shape used. This type is safer, as there is less tubing between the rider's legs and dismounting in a hurry can be easily accomplished.
Finally, a tall bike frame can be made from scratch.[3][4][5]
Practical uses
[edit]
Tall bikes are usually used for recreation and entertainment but can also be used for general transportation. Regular tall-bike commuters note that their increased visibility and the simple 'wow factor' give them a safety advantage in automobile traffic over 'short bikes.'[6][7] However, there are issues with mounting and dismounting similar to those presented by penny-farthings.
History
[edit]
Historically, one of the first practical uses of the tall bike was as a late 19th-century lamp lighting system, by which a worker would mount a specialized tall bicycle while equipped with a torch for lighting gas lamps. As the workers rode to each lamp, they would lean against the lamp post, light it, and then ride to the next. Upon completing the lamp circuit, an assistant will help the rider dismount. For this reason, the term 'lamplighter' is still sometimes used to refer to a very tall bicycle.[8]
Sporting
[edit]Tall bike jousting is a popular sport among tall bike owners and is commonly considered to have been introduced by Jake Houle and Lil' Bob of the Hard Times/Black Label Bike Club.[9] Combatants arm themselves with lances and attempt to score points by dislodging the other rider. Rules vary by area and with the mood of the combatants. Like all jousting games, participants consider it a sport in which honor plays a role and dishonorable wins are frowned upon.
Jousters create lances that vary from simple PVC pipe and foam devices that are flexible, soft, and relatively safe, up to wooden or metal lances that may be quite dangerous. Regional rules vary, some specifying flaming lances for effect, or glass containers attached to the end, the goal being to break the glass container to score points.[9]
.jpg)
Design considerations
[edit]Tall bikes present some interesting design considerations, and different localities tend to have different methods of dealing with them.
One consistent issue is that the seat tends to end up in line with, or behind, the rear axle, which creates a powerful tendency to lift the front wheel of the bicycle on acceleration.[10] Some bicycle builders simply accept this tendency, but others solve the problem by moving the seat post forward, lowering the handlebars, moving the rear wheel backward, or by using a smaller wheel in front, typically a 24" instead of a 26".[citation needed]
Stability can also be negatively affected, and enhancements such as extended wheelbase by welding extensions on the front and rear dropouts can benefit stability. Contest holders often place restrictions on such modification to prevent unfair advantages.
See the bicycle and motorcycle geometry and bicycle and motorcycle dynamics articles for more on these issues.
Clubs
[edit]Tall bikes are a popular mode of transportation for such notable modern 'bicycle clubs' as Midnight Ridazz, Angelopes, SCUL, Zoobomb, Rat Patrol, Black Label Bicycle Club, The Winking Circle, C.h.u.n.k. 666, Cyclecide, and activist groups.
They are also a mainstay among builders of clown bikes, art bikes, clown alleys and parade groups.
Gallery
[edit]-
Tandem tall bike -
Long tall bike -
Tall bike with simple construction -
Tall bike with complicated construction
See also
[edit]References
[edit]- ^ Avidor, Ken (March 7, 2006). "Who rides the tall bikes?". Twin Cities Daily Planet. Retrieved 1 October 2010.
- ^ "Brothers' long road on tall bikes". BBC News. 28 July 2006. Retrieved 1 October 2010.
- ^ James Huang (2011). "Calfee showed off this wild carbon and hemp fiber tall bike". Future Publishing Limited. Retrieved 2011-03-03.
- ^ Jonathan Maus (February 25, 2011). "NAHBS sneak peek: Calfee's carbon bamboo tall bike". PedalTown Media Inc. Retrieved 2011-03-03.
- ^ James Huang (February 25, 2011). "North American Handmade Bicycle Show (NAHBS) 2011: part 3". Future Publishing Limited. Retrieved 2011-03-03.
- ^ Chicago Magazine, July 2006, page 58
- ^ Chicago Tribune, May 19, 2005, At Play section, page 1
- ^ "Giraffe Lamplighter's Bicycle, 1898". Sotheby's. Retrieved 2011-03-03.
- ^ a b "Unstoppable". New York Times. April 29, 2007
- ^ Peck, Dennis (June 13, 2009). "Irondelles ride their tall bikes into big Portland Pedalpalooza weekend". The Oregonian. Retrieved 1 October 2010.